Premium™ 1 oz. Fletch Adhesive (1023) by Goat Tuff®. Plastic bottles with a thin dispensing nozzle. A powerful, easy to work with cyanoacrylate glue formulated to cover a broad range of substrates. Goat Tuff glues are the purest, strongest, fastest setting and easiest to work with on the market today. In addition to being the best glues for arrow making projects they have a wide variety of other uses around the house, yard and shop. When the need for the strongest glue arises, Goat Tuff will come through.
- This product is Non-Returnable.
|Volume: 1 oz.|
- Purest Glue: The purest, most reliable cyanoacrylate glue available
- Archery Uses: Works great on carbon, aluminum and wood shafts, vanes, feathers, nocks, and inserts
- Other Uses: This incredible glue also works well on other materials including most plastics, rubbers, metals, leather, porcelain and more for indoor and outdoor products
- Easy Application: User friendly, slightly thinner viscosity than High Performance Glue
- Quick Bond: Bonds most vanes under 10 seconds, feathers in 60 seconds, (15 seconds when using Accelerator)
- Super Strong Bond: Over 4000 psi, weatherproof, impact and shear resistant for a bond that won't let go
- Long Shelf Life: When properly capped and stored in an upright position between 45 and 72 degrees in a dry location out of direct sunlight
- Cyanoacrylate glue is engineered to cure quickly when applied using a very thin glue line
- Goat Tuff Glues are the strongest, fastest drying glues on the market
- Use glue sparingly. Less is better
- Goat Tuff glues contain no solvents and are nonflammable
- Will bond a broad range of materials including most plastics, rubber, leather, metal, wood and more
- To guarantee the maximum performance characteristics of the glue, parts to be glued should be clean and free of all contamination
- Unlike many commercial types of glue, Goat Tuff cyanoacrylate glues have a shelf life of up to two years
- For maximum shelf life of unopened bottles store glue in a cool dry place (45 to 72 degrees) and out of direct sunlight
- After bottle has been opened always store in an upright position, do NOT refrigerate after opening
- To prevent glue contamination do not mix glues, or pour new glue into used glue bottles
Some recommendations when using Goat Tuff Glue:
Cap may be left off between applying a bead of glue from one vane to the next. However always clean tip and reseal bottle when finished.
If working for long stretches of time use clean paper towel to wipe the tip of bottle clean (hourly) or when you recognize a build-up of glue. This glue should be easy to remove.
When finished fletching set bottle of glue upright, allow glue to wick down into bottle. Allow 2-3 minutes for this to take place.
If there is a bubble of glue in the long narrow tip squeeze the bottle a little to force air out the tip. This will allow all the glue to drain back into the bottle.
With a clean paper towel wipe the long narrow tip removing any glue that has accumulated.