Product Details
4PM RC System by Futaba RC®. 4PM Transmitter - Super Response Digital Proportional RC System. For Use with Surface Models (01004387-3) (01004388-3) (01004397-3).
Specifications
| Transmitter Specs: T-Fhss Sr/T-Fhss/S-Fhss System, Wheel Type, 4 Channels |
| Transmitter Communication Method: One-Way Operating System |
| Transmitter Maximum Operating Range: 100M (Except the Minit System) (Optimum Condition) |
| Transmitter for Safety: F/S, B-F/S, Id |
| Transmitter Frequency: 2.4 Ghz Band |
| Transmitter Rf Power Output: 100Mw Eirp |
| Transmitter Power Requirement: (Dry Cell Battery) Penlight x 3 (4.5 V) |
| Transmitter Current Drain: 150 Ma or Less |
| Transmission Antenna: 1/2Λ Di-Pole |
Features
- Expertly made from sturdy materials
- Built for maximum strength and endurance
- Exceptional service and dependability
T-FHSS SR (SUPER RESPONSE) AND Telemetry T-FHSS:
In addition to the T-FHSS Telemetry System, they added a T-FHSS SR (Super Response) System that increased processing Speed to further improve response. SR System does not support Telemetry Function. R304SB and R304SB-E are not compatible with SR System.
T-FHSS MINIZ System:
By changing to the MINIZ System in the receiver setting menu, you can use Kyosho Mini - Z Evo dedicated receiver RA-42. Dedicated receiver RA-42 requires purchase separately. 01004397-3 comes with no receiver.
Telemetry System:
The T4PM Transmitter has adopted the newly developed bidirectional communication System "T-FHSS".
2.4 GHZ SS Telemetry System:
Frequency Channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This System minimizes the interference from other 2.4 GHz Systems.
Model Memory For 40 Models:
Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A Model Memory with different setups can be created by using the model copy Function.
4 AXIS JOG BUTTON:
The (JOG) button can be operated in 4 directions: up, down, left, and right.
ESC-LINK Function (MC-LINK):
This dedicated Function allows you set up the Link software so that your T4PM can control variable frequency and other data Changes in Futaba Speed controllers (ESCs): MC950CR, MC850C, MC851C, MC602C, MC402CR, etc.
S.BUS Servo:
This is a special Function that allows setting of the parameters of their S.Bus Servo whose settings are Changed by using PC Link software. In addition to the conventional wired System, it can be set wirelessly in combination with the R334SBS or R334SBS-E.
Steering Mixing:
Smooth cornering is possible by independent left and right Steering Servo setting.
Brake Mixing For LARGE CARS (BRAKE):
Brake Mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently.
GYRO Mixing (GYRO MIX):
The sensitivity of Futaba car rate gyros can be adjusted from the T4PM.
4WS Mixing For CRAWLERS AND OTHER 4WS TYPE (4WS):
This Function can be used with crawlers and other 4WS type vehicles.
DUAL ESCS Mixing For CRAWLERS CARS (DUAL ESC):
ESCs at the front and rear are controlled independently.
CPS-1 Mixing (CPS MIX):
LED lighting and flashing control using their CPS-1 Channel power switch can be matched to Steering and Throttle operation by switch only.
ANTI-SKID BRAKING System (TH A.B.S):
This Function applies the brakes so that the tires of gas powered cars, etc. do not lose their grip on the road even when braking at corners.
Throttle ACCELERATION (ACCEL):
Gas power cars have a time lag beFore the clutch and brakes become effective. The Throttle acceleration Function reduces this time lag.
Throttle Speed (Speed):
Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the Throttle Speed Function, operation can be perFormed smoothly and easily. It also suppresses Battery consumption.
Steering Speed (Speed):
When you sense that the Steering Servo is too fast, etc., the Servo Operating Speed (direction that suppresses the maximum Speed) can be adjusted.
RACING TIMER (TIMER):
The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling time are indicated by an audible alarm. An up timer is also provided.
Function SELECT SWITCH (SWITCH)/DIAL Function (Trim DIAL):
This assigns Functions to 2 switches and dials (Digital Trim, Digital dial). The step amount and Operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are Digital.
TRIGGER POSITION CAN BE ChangeD:
The position of the Throttle trigger can be moved Forward and backward.
TENSION ADJUSTMENT Function:
The tension of the Steering wheel and Throttle trigger springs can be adjusted from the outside.
MECHANICAL ATL ADJUSTMENT:
Make this adjustment when you want to decrease the total travel of the brake (push) side of the Throttle trigger.
Founded in 1948 in Japan, Futaba® was a manufacturer of receiver vacuum tubes. Utilizing vacuum tube technology, it began manufacturing vacuum fluorescent displays. In 1962, Futaba began producing radio control equipment, as well as press die set components, establishing what still remains as two of the company’s primary divisions. This was followed by the development of mold base components and the more recent addition of VFD modules to complete the lineup of Futaba’s major products. The company aims to help you enjoy your hobby to the fullest while implementing modern technology, developing innovative products, and setting trends for the hobby industry.